Changing a tyre isn’t nearly as tough as it’s made up to be. It also does not need the strength of a bodybuilder to do the task. It’s a skill that can be retained and achieved by anyone. Before changing the tyre, make sure you have a safe parking spot before you begin.
Going further and risk damaging the wheel rim is preferable to stop in a potentially unsafe location, such as on a small road. When parking, turn on your hazard lights. Put it on and place your warning triangle to warn cars coming if you have one.
How to change a car tyre?
Certain tools come included with the car, while others, such as those that make changing a tyre easy, are not available. To change the tyre easily, you’ll need to purchase these items ahead of time. Here are all of the tools you’ll need to get the task done quickly:
Things needed to change a car tyre
Carjack
A car jack is an essential piece of tyre-changing equipment. They are available in various sizes, load-bearing capabilities, and features.
Changing tyres normally requires a car jack with a load capability of at least two tonnes. The maximum lifting height is also critical. When the jack is completely extended, it specifies the distance from the ground. Why is this so crucial when it comes to tyre replacement?
It’s possible that using a jack lifting height that’s too low for your car won’t be enough to jack it up. As a result, the tyres are unable to be removed.
Before purchasing a car jack, consult your vehicle manual or ask for advice in a Car Service in Collingwood to determine the proper lifting height for your vehicle.
Cross wrench
The cross wrench is another essential item while changing tyres (also known as a 4-way wheel brace). After changing the tyres, use the cross wrench to loosen the wheel nuts and then tighten them again.
Cross-wrench spanner widths for vehicles are usually suited to the most popular wheel nut diameters. Before purchasing, make sure the cross wrench will fit the size of your wheel nuts.
Torque wrench
When replacing tyres, a torque wrench is a must-have tool. You may use it to check that the wheel bolts or wheel nuts are properly tightened.
This is critical for both seating and steering wheel grip. Each type of vehicle has a torque value that must be met. Since it varies on the vehicle type, rim size, design, and number of bolts, this is generally between 110 Nm and 120 Nm (Newton-meters). The car manual will tell you which value is appropriate for your wheels.
The torque wrench should only secure wheel bolts, not loosen them. The mechanism may be destroyed if you misuse it. You can ask for assistance in a Car Service in Collingwood if you are nearby.
Wire brush
Remove loose rust and debris from the wheel hub, wheel connecting piece, and axle using the wire brush.
Gloves
When replacing tyres, always wear gloves. They will not only improve your grip on the tools, but they will also prevent brake dust from accumulating on your hands and in your nails.
Spare tyre
Of course, never forget to bring an extra tyre to change the flat tyre. It will be bothersome if you have to drive your way to a Car Service in Collingwood if you don’t have a spare tyre with you.
Steps to change a car tyre
Step 1: Look for a safe place
When you realize that your car has a flat tyre, it is critical to get off the road safely. It is risky to swerve suddenly since it will endanger you and other vehicles on the road.
Next, look for a safe place to park your car, evacuate, and change the tyre. Remember to provide enough safe distance between the car and the road when parking. It shows courtesy to other cars.
Step 2: Switch the parking lights on
You are alerting other motorists by turning on the parking or danger lights. They’ll see the blinking lights from afar, and you’ll be able to change the tyre securely.
Step 3: Park by engaging the hand-break
Pull the hand-break to its highest position to park the car. This will keep the car locked in place while applying force while changing the car tyre.
Step 4: Tighten the wheel wedges
You need to tighten the wheel wedges behind the good tyres to ensure safety. These are particularly beneficial on a sloping road.
Step 5: Remove wheel covers
Wheel covers cover the majority of car tyres. Before you can change the flat tyre, you must first remove these. To learn how to accomplish this, look through the owner’s car’s manual.
It’s important to remember that car models have different wheel cover settings, so make sure you know yours.
Step 6: Loosen the lug nuts halfway
The lug nuts should only be loosened halfway before using a jack to elevate the car, so if you lift the car first, the tyre will continue to rotate. To loosen the lug nuts, use the lug wrench. Make sure you’re using the right side of the wrench for this step.
Step 7: Tie the jack with wooden boards
Identify the jacking point underneath your vehicle. This is where the jack should be plugged into the car. Keep the jack on the wooden planks underneath the jacking point.
Attach the jack to the jacking point and lift the car until a space appears between the ground and the tyre.
Step 8: Remove the lug nuts completely
With the help of a wrench and to remove all the lug nuts, unscrew the lug nuts completely.
Step 9: Replace the flat tyre
Replace the flat tyre with a spare by removing it from the frame. Remember always to bring a spare tyre, mostly when going somewhere far from car services shops.
Step 10: Screw lug nuts and replace wheel cover
This is the final step in the flat-tyre changing process. Lower the car by partly tightening the lug nuts. After the tires have made firm contact with the ground, remove the jack and wooden planks. Replace the wheel cover after tightening the lug nuts.
You can continue travelling after checking the tyre pressure if you keep all of the tools safely in the car. If you don’t have a tool, take your tyre to a Car Service in Collingwood and get it examined. The flat tyre should be fixed as soon as possible not to cause any further damage.
And these are the guide on changing car tyres; however, if you can’t do it on your own, always ask for professional assistance. It will help you save time and resources.
Author’s Bio: Trent Parker, Travel Writer in Sydney Trent has been a travelling writer for the past 5 years, and comes to Castle Jackson to expand his writing skills. He has been roaming around Australia (when he’s able to) and writing on the road about all things.
His specialty is SEO copywriting and helping website’s meet their On-Site SEO goals with well crafted and engaging copy that performs well for Google and for users on the web.
