Do you know how to clean a bathroom floor?
If you don’t, it might seem like a thankless, insurmountable task. Floors get so dirty with just day-to-day bathroom use, you might wonder how you can ever make it look clean. Without the right cleaning tips, your bathroom will never look spick-and-span.
Fortunately, it’s not that hard, and there are only a few points in the cleaning process where it gets a little tricky.
Read on to learn everything you need to know to keep your bathroom floor sparkling clean!
Start Preparing
To make sure you properly do a bathroom cleaning, it’s important to start the process by preparing the necessary materials. You’ll need cleaning supplies such as a mop, bucket, soap, and a broom. You should also gather a pair of rubber gloves, a face mask, and safety glasses before you get started.
Additionally, it’s important to make sure that the area is adequately ventilated. If you have a fan or window in the bathroom, this will help to circulate the air and prevent aggravation of chemical fumes. After the area is prepared, you can start the cleaning process.
Sweep and Steam
First, start by sweeping. This will help to remove any dirt and debris from the surface of the floor. Once you have swept, use a steam cleaner to finish the job.
This will help to make sure you are getting rid of all the dirt and grime that was previously on your floor. Make sure to read the instruction manual for your particular steam cleaner to make sure that you are using it correctly.
Apply Cleaning Solutions
You want to pick a cleaning solution that will cut through dirt and grime without damaging the floor. Starting with a small area, mop in a circular pattern to help release and break down dirt.
Rinse the mop often in the bucket of solution and change the water as you move to different areas. After the floor is cleaned, use a clean and dry mop to remove excess water from the floor. Finally, you want to allow the floor to fully dry before applying another layer of cleaning solution or a floor sealer.
Begin Scrubbing
Starting at the farthest corner of the bathroom, work your way toward the doorway, making slow, wide passes with the mop to clean the floor. You can use the scraper to scrape away any tougher stains and spots.
Change the water when necessary and rinse the mop with clean water to ensure dirt isn’t being transferred back onto the floor. Replace the dirty water with wet mop solution every 2-3 passes. Doing these can greatly clean a gross bathroom.
Wash and Dry
After cleaning it all, rinse the floor with clean water and ensure that all the detergent has been removed. Dry the floor thoroughly with cleaning cloths and then use a vacuum cleaner again to get rid of any remaining moisture.
After that, your bathroom floor is now clean and ready to use. To know more about cleaning your bathroom, visit Legacyhousecleaning.com.
Master How to Clean a Bathroom
Your bathroom floor can be sparkling and look new again with these easy steps! So don’t waste any more time and get on with the job! And now that your bathroom floor is properly cleaned and sanitized, you can enjoy the feeling of a clean bathroom again.
Knowing how to clean a bathroom can greatly benefit your home. So start now and achieve spick and span bathroom floor!
If you want to read more articles, go to our blog.
